할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
INTRODUCTION
TF02-i LiDAR is an industrial-grade medium-range distance sensor. Its maximum detection range can reach up to 40m and it has an adjustable frame rate with a maximum of 1KHz.
This rangefinder has a PC/ABS/PMMA enclosure with IP65 water and dust resistance. It supports a wide range of input voltages (7-30V) with reverse protection to protect the internal circuit and adopts RS485 communication interface and standard Modbus protocol. Multiple built-in operating modes are included for the users to change their parameters and configurations to meet different applications.
The TF02-i LiDAR can be used on the Arduino UNOR3 through the TTL to RS485 Shield, and it can also be used on the Raspberry Pi through the USB to RS485 module. Those two ways provided by DFRobot can make TF02-i LiDAR simpler to be used.
How does TF02-i LIDAR work?
TF02-i is a single point LiDAR, which is based on Pulse Time of Flight (PTOF).
It adopts an incoherent energy receiving mode, and the detection is mainly based on Pulse counting. TF02-i emits a narrow pulse laser, which is collimated by the transmitting lens to form a collimated light, which enters the receiving system after being reflected by the measured target and is focused on the APD detector by the receiving lens.
The time between the transmitted signal and the received signal is calculated through the circuit amplification and filtering, and the distance between TF02-i and the measured target can be calculated through the speed of light.
Pinout Diagram
Application
SELECTION GUIDE
Parameters | TFmini-i LiDAR | TF02-i LiDAR | |
Product Performance | Operating Range | 0.1-12m@90% reflectivity | 0.1-40m@90% reflectivity |
0.1-7m@10% reflectivity | 0.1-13.5m@10% reflectivity | ||
0.1-12m@90% reflectivity&70Klux | 0.1-40m@90% reflectivity&100Klux | ||
0.1-7m@10% reflectivity&70Klux | 0.1-13.5m@10% reflectivity&100Klux | ||
Accuracy | ±6cm (0.1~6m), ±1% (6~12m) | ±5cm (0.1~5m), ±1% (5~40m) | |
Distance resolution | 1cm | 1cm | |
Frame rate | 100Hz | 100Hz | |
Ambient light immunity | 70Klux | 100Klux | |
Operating temperature | -20~60℃ | -20~60℃ | |
Enclosure rating | IP65 | IP65 | |
Optical Parameters | Light source | VCSEL | VCSEL |
Central wavelength | 850nm | 850nm | |
Photobiological safety | Class1(EN60825) | Class1(EN60825) | |
FOV (Field of view) | 2° | 3° | |
Electrical Parameters | Supply voltage | 7~30V | 7~30V |
Average current | ≤65mA@12V | ≤70mA@12V | |
Power consumption | ≤0.8W@12V | ≤0.85W@12V | |
peak current | 100mA | 100mA | |
Others | Communication interface | RS-485 | RS-485 |
Dimensions | 50mm*34mm*41mm(L*W*H) | 69mmx41.5mmx31.5mm(L*W*H) | |
Enclosure material | PC/ABS/PMMA | PC/ABS/PMMA | |
Storage temperature | -30~75℃ | -30~80℃ | |
Weight | Weight 52g | Weight 60g(with cable) | |
Cable length | 70cm | 70cm |
FEATURES
Wide range of input voltages (7-30V) with reverse protection
RS485 interface communication
Adjustable frame rate with a maximum of 1KHz
Medium range detection (0.1 to 40m)
IP65 protection for industrial application
Compatible with Arduino UNO R3 and Raspberry Pi
APPLICATIONS
Detection of vehicle and pedestrian
Vehicle collision avoidance and safety warning systems
UAV assisted takeoff and landing
Altimeter
SPECIFICATION
Product Performance
Operating Range:
0.1-40m@90% reflectivity
0.1-13.5m@10% reflectivity
0.1-40m@90% reflectivity & 100Klux
0.1-13.5m@10% reflectivity & 100Klux
Accuracy: ±5cm (0.1~5m), ±1% (5~40m)
Distance resolution: 1cm
Frame rate: 100Hz
Ambient light immunity: 100Klux
Operating temperature: -20~60℃
Repeatability: 1σ:<2cm(0.1~35m@90% reflectivity)
Enclosure rating: IP65
Optical Parameters
Light source: VCSEL
Central wavelength: 850nm
Photobiological safety: Class1(EN60825)
FOV (Field of view): 3°
Electrical Parameters
Supply voltage: 7~30V
Average current: ≤70mA@12V
Power consumption: ≤0.85W@12V
peak current: 100mA
Others
Communication interface: RS-485
Dimensions: 69mmx41.5mmx31.5mm(L*W*H)
Enclosure material: PC/ABS/PMMA
Storage tempe rature: -30~80℃
Weight: 60g (with cable)
Cable length: 70cm
DOCUMENTS
Product wiki
Software: Arduino IDE
SHIPPING LIST
TF02-i LiDAR Laser Range Sensor (40m) x1
고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등
정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.
무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지
않은 주문은 자동취소 됩니다.
배송 방법 : 택배
배송 지역 : 전국지역
배송 비용 : 3,000원
배송 기간 : 3일 ~ 14일
배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.
교환 및 반품 주소
- [13211] 경기도 성남시 중원구 사기막골로62번길 33 (상대원동) 센터엠지식산업센터 S1227호
교환 및 반품이 가능한 경우
- 계약내용에 관한 서면을 받은 날부터 7일. 단, 그 서면을 받은 때보다 재화등의 공급이 늦게 이루어진 경우에는 재화등을 공급받거나 재화등의 공급이 시작된 날부터 7일 이내
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과 다르거나 계약내용과 다르게 이행된 때에는 당해 재화 등을 공급받은 날 부터 3월이내, 그사실을 알게 된 날 또는 알 수 있었던 날부터 30일이내
교환 및 반품이 불가능한 경우
- 이용자에게 책임 있는 사유로 재화 등이 멸실 또는 훼손된 경우(다만, 재화 등의 내용을 확인하기 위하여 포장 등을 훼손한 경우에는 청약철회를 할 수 있습니다)
- 이용자의 사용 또는 일부 소비에 의하여 재화 등의 가치가 현저히 감소한 경우
- 시간의 경과에 의하여 재판매가 곤란할 정도로 재화등의 가치가 현저히 감소한 경우
- 복제가 가능한 재화등의 포장을 훼손한 경우
- 개별 주문 생산되는 재화 등 청약철회시 판매자에게 회복할 수 없는 피해가 예상되어 소비자의 사전 동의를 얻은 경우
- 디지털 콘텐츠의 제공이 개시된 경우, (다만, 가분적 용역 또는 가분적 디지털콘텐츠로 구성된 계약의 경우 제공이 개시되지 아니한 부분은 청약철회를 할 수 있습니다.)
※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
(색상 교환, 사이즈 교환 등 포함)